Installation and use of TV box
We use the installation of High performance android TV BOX as an example to introduce the installation of the built-in TV box.
1. Insert card
The installation of the built-in TV box is simple. It's no different from installing a sound card with a PCI interface. You don't have to worry about the wrong interface, because when computer hardware is designed, different slots are designed into different shapes. So rest assured, it's the right thing to do.
2. The attachment
And then the job is to wire up, a TV antenna input, just like the one behind the TV; An audio output, connect it to the audio input of the sound card on the line, otherwise there is no sound yo; Then there's the plug for the infrared receiver, which you plug into to direct the High definition good price smart TV BOX with your remote control. In addition to these several must connect, the rest is such as AV, IEEE1394, S port, and so on these are not commonly used, used to connect the things.
3. The installation driver
Turn on your computer, boot Windows, and Windows will find new hardware, followed by the installation of drivers and software. The installation steps are usually explained in the instructions.
External TV box installation and the installation of the built-in TV card is very different, let's to d TW8821 Ⅱ computer colour TV receiver as an example to introduce the installation of external TV box.
1. Hardware installation
Turn off the computer power and open the case. Install the TV box shaped like a cd-rom drive on the 5-inch drive bracket inside the computer case.
2. The connecting transfer card
Insert one end of the flexible cable into the TV box and the other end into the adapter card. Then insert one end of the antenna plug cable into the TV box and the other end into the adapter card. Finally, insert the four-pin power plug into the TV box, and install the TV box.
3. Turn on the power
After the installation is completed, turn on the computer Power, and the TV box indicator light does not light up, which will display the computer screen. When the TV box Power button is pressed, the indicator light turns red, which will display the TV screen.